CNC Machined Ebony Wood SME type Headshell 5N pure silver lead wire!

Description

Type:
SME type 4 pins connector
with pure silver leadwire
1/2'
Ebony Wood
Headshell
Weight: about
8.5g
every headshell with fingerlift
Headshell is
CNC high precision machined
from a single block of
African ebony wood
,
Extremely high level of craftsmanship
Hand polishing one by one,
oil finish. Beautiful and elegant pure natural unique wood grain!
Two
lengthened (
long
23mm ) cartridge mount hole
, much longer adjusting range than most
headshell
on the market
Suitable for SME
Type
Connector "s" or straight tonearm,
the connector dimensions are
8 mm diameter x 12 mm length.
All 4 pins on headshells are
24K gold plated.
Suitable for 1/2" mount cartridges
5N Pure Silver litz leadwire is the best wire for faster transmission speeds, lossless data and cleaner sound
. It's
0.55mm outer diameter, litz construction 7 strands and each strand is 0.1mm diameter 99.999+% Pure soft annealed silver wires in oversized PTFE Teflon insulation. Woven Teflon Litz construction is ideal to deliver RFI and EMI rejection and provides low capacitance. 99.999+% silver transmits electrical signals faster and with less distortion than ordinary OFC wires. High grade Teflon insulation gives a predominant air dielectric and is regarded as the best insulator for bare cable. Our silver is produced using the most up to date continuous casting methods in one of the largest and most stringently tested facilities in the world.
Every piece color lead wire is made of
2 pieces
transparent 30AWG FURUKAWA 5N Pure Silver wires and litz construction for much more cleaner sound.
Wire length: 2 inches (50mm) long with female connector sockets on each end
Terminals on wires are phosphor copper and silver plated for good electrical conductivity and non-allergy reaction.  Each terminal end is wrapped in color coded shrink tubing.  Terminals are hand soldered. Color-coded heat shrink is used at the cartridge end,  black heat shrink at the head shell end.
Application:  Color end is fitting diameter about
1.20~1.30mm
pins on cartridge, black end is fitting headshell
Mount on cartridge according to the color of shrink tubing:
BLUE = LG (left ground)
GREEN = RG (right ground)
WHITE = L (left positive)
RED = R (right positive)