NVX SDBBP40 Premium Black Sound Deadening Bulk Pack 40 Square feet

Description

Sonic Electronix Ebay - NVX SDBBP40 Premium Stealth Black
Product SKU: 133811 ID: sdbbp40
Our Store
Contact Us
About Us
Car Audio & Video
Car Security & Safety
Marine
Powersports
Search
NVX SDBBP40 Premium Stealth Black
Premium Sound Deadening Bulk Pack 40 Square feet (Entire Car), Ten 18" x 32" Sheets (91mil Thick)
0
1
2
3
4
5
6
Description
Features & Specs
Accessories
Store Policies
Item Condition: Brand New
Product Details:
NVX SDBBP40 Premium Stealth Black
Ten 18" x 32" Pieces of Sound Deadening Material
90.55mil thick (2.3mm)! There are cheaper, inferior solutions at 50-80mil, but we do not recommend that thin of a solution as it will not perform as well.
40 Square feet total
Complete sound damping kit for entire vehicle/car. Can be used for areas such as trunk, doors, roof and floor
Made from 100% Butyl Rubber
Eliminates road noise
Quiets vibrations
Increases sound quality and output of car audio system
Stops rattles
Increases SPL
Reduces heat
Easy to form aluminum conforms to desired area of vehicle with ease
Four step peel and stick design for easy installation
Up to 30% thicker than the leading competitors
Authorized Internet Dealer
1-year Manufacturer's Warranty
Dimensions (each piece): 18"
L
x 32"
W
How to Install Sound Damping Properly
Sound damping can be a very beneficial accessory to reduce noise and vibration. To take full advantage of this soundproofing, read these instructions carefully and follow them till the end. It’s important to familiarize yourself with all the details to install the sound damping correctly. Incorrect installation will result in less than desirable results.
Step #1
The first step is to decide which location in your car you want to insulate. These locations include the floorboards, roof, door panels, trunk or firewall. We recommend soundproofing all metal surfaces for maximum sound deadening performance. Next, refer to your vehicle’s service manual for information on how to dismantle the trimming panels. Be careful when removing the panels to avoid breaking the fixing clips.
Step #2
Once the trimming is dismantled, remove the remainder of the factory insulation if it is damaged. If it is still intact, there is no need to permanently remove it. Next, you need to properly clean, dry and degrease the prospective surface. Sound deadening won't adhere properly if applied to a wet or dirty surface. Use a metal surface cleaner or degreaser along with a dry, clean rag. Make sure to use gloves and apply the degreaser in a well-ventilated space.
Step #3
For this step, measure the prospective surface you are going to treat. To make things easier, make a template of the appropriate size on a large sheet of paper and then transfer it to the damping material. That will make it easier to install it more accurately and avoid wasting material. Use a utility knife to cut the desired shape and size. Be careful and use gloves to protect your hands.
Step #4
Place a sheet of sound damping to the surface without removing the protective film. If it covers the surface properly, you are ready to install it. Gradually remove the protective paper film as you apply it to the surface for better adhesion. Once on the surface, press it down firmly until it is set in place. Flatten it with your hands to avoid unnecessary air bubbles. Use a rolling tool like the
NVX SDRLR1
to press the mat down to the metal surface. Go across the entire surface with the roller to ensure that the sheet is installed properly.
Step #5
Once all sound deadening is in place, simply reinstall all trim pieces and carpet back to its original placement. Now you are ready to enjoy higher sound quality with fewer vibrations.
International customers
are responsible for any and all customs, import duties, brokerage fees, and taxes. They are not included in the item price or stated shipping charges.
Additional shipping fees are required for locations including, but not limited to: PO Boxes, APO/FPO locations, Alaska, Hawaii, Puerto Rico, Guam, Canada and other countries outside the USA.
Sound Damping Specifications
Installation Location
Entire Car
Material Thickness
N/A
Total Amount of Material
40 square feet
Material Use
Sound Absorber
Secondary Use
Vibration Dampener
Warranty
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer
Installation Tools and Accessories
Use these tools and accessories to install your sound dampening material. With the correct tools, the installation of your sound dampening material will go faster and last longer.
Assists in removing door panels, vehicle upholstery, and many other parts of the car.
NVX SD-KIT
Complete Sound Dampening Installation Kit
NVX SDRLR1 Rubber Sound Dampening Roller
2" Professional Heavy Duty Roller for Sound Dampening
Policies for US and Canadian Customers
Returns
Shipping
Payments
Warranty
International Policies
Item Specific Return Policy
Standard Return Policy
Return for refund within: 30 days
Return for replacement within: 30 days
Standard Return Policy Overview
You may return merchandise purchased from Sonic Electronix for a refund or a replacement, provided that the procedures and requirements are followed. All returns require a return merchandise authorization (RMA) number. An RMA number must be issued within 30 calendar days after the date of purchase. An RMA number is valid for 14 calendar days after it is issued.
Refunds
A processing fee of 10 percent will apply to the value of merchandise returned for a refund. Refunds are applied to the payment method used at the time of purchase 5-10 days after our receipt of the returned merchandise. We will only refund the value of the merchandise returned, not the shipping cost. On items with free shipping returned for a refund, the original shipping cost that we paid the shipping courier will be deducted from your refund.
Exchanges
If you purchased a product that you wish to exchange for an alternate item, you can return the item for a refund and simply place a new order for the item you desire. We do not apply store credit to your new purchase. If we see a new purchase for equal or greater value of your return, we will waive the 10 percent processing fee.
Defective Merchandise
Merchandise that is discovered to be defective upon receipt will be replaced. You may also return defective merchandise for a refund; however, a 10 percent processing fee will apply. The processing fee will only apply if you choose to return the merchandise for a refund. No fee will be assessed if we are permitted to resolve the issue by replacing your defective merchandise.
Damaged Merchandise
All packages are inspected for damage prior to leaving our warehouse. If your merchandise is damaged during shipment by the shipping courier, please contact us immediately as we must be informed within 10 calendar days from the date of receipt for all damage/shipping related claims. Damaged merchandise can be replaced with the same model only. You may also return damaged merchandise for a refund; however, a 10 percent processing fee will apply. The processing fee will only apply if you choose to return the merchandise for a refund. No fee will be assessed if we are permitted to resolve the issue by replacing your damaged merchandise.
Return Shipping
Return shipping cost (the cost to send merchandise back to our store) is comparable to your cost of driving to any store for returning an item, which is not reimbursable. Therefore, we do not reimburse any return shipping cost.
If an item you received is defective, we will definitely replace the item with a new one; however, we do not cover or reimburse the shipping cost for returning defective merchandise back to our store. We will ship the replacement product to you at our cost, and use every good measure to ensure that the replacement order is processed quickly.
Replacement Terms
We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility. The replacement will ship within four business days following our receipt of your return (excluding weekends and national holidays). We do not send advance replacements or replacements before we receive and inspect the returned merchandise.
To receive a replacement quicker, you may place a new order for the same item (shipping not included), and we will issue a refund for the full value of the returned product (including shipping), upon completion of our return process.
Returning Items
Please send us a message through eBay or contact us by phone at 1-877-BUY-SONIC (1-877-289-7664, Monday-Friday, 7:00AM-5PM Pacific Time) to receive an RMA number. You will be required to complete our product return form which will also provide helpful instructions for your return.
All returned merchandise must be in original condition, and must include the original factory box (UPC bar codes and serial numbers must be intact) and factory packaging (e.g. foam, plastic, wrappings, etc.), peripherals (e.g. battery, charger, cords, straps, etc.), included warranty cards (without markings), and all instruction booklets and paperwork. The RMA number or any other inscriptions must not be written or printed on the product box or packaging. We will not process the return if any of these conditions are not followed.
To locate the nearest shipping outlet, you may contact the following carriers:
UPS: (800) 742-587 or
http://www.ups.com
FedEx: (800) 463-3339 or
http://www.fedex.com
USPS (Post Office): (800) 275-8777 or
http://www.usps.com
Remember, returned merchandise that is lost or damaged during transit is solely the shipper's responsibility (which is you when you return a product to us). It is important to save the tracking information and to properly insure all merchandise being returned to Sonic Electronix.
Return Exceptions
Although our return policy is quite flexible on most items, there are some exceptions, as written below:
Any product not purchased from Sonic Electronix
Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number
Any product that is returned without
all
original packaging and accessories, including the retail box, manuals, cables, and all other items originally included with the product
Any product from which the UPC code has been removed from its packaging
Any product that exhibits physical damage or abuse
Any product for which you have submitted a mail-in rebate
Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense.
return to top of policies
Shipping Policies
The default shipping rate and method listed are for residential or commercial destinations within the continental 48 United States (PO Boxes not included).
Additional shipping fees are required for all other locations including, but not limited to:
• PO Boxes, APO/FPO locations, Alaska, Hawaii, Puerto Rico, Guam, Canada and other countries outside the USA.
We will make every attempt to process and ship all items within 2 business days of your cleared payment. Following order processing, please allow proper time for delivery. UPS Ground shipments arrive within 3-7 business days. To provide the most affordable rates, small items shipped via Standard Flat Rate Shipping or USPS First Class Mail ship via a joint effort by DHL and USPS and are delivered within 7-10 days from the date of shipment.
We will update your eBay record with tracking information and send an e-mail confirming shipment. If 3 business days have passed since you sent payment and you do not receive an update through eBay or a tracking number via e-mail, please contact us immediately through eBay or phone at 1-877-289-7664.
International customers are responsible for any and all customs, import duties, brokerage fees, and taxes. They are not included in the item price or stated shipping charges.
return to top of policies
Payments Accepted
PayPal is accepted for all customers. If you need checkout assistance, please contact us during our business hours through eBay or phone (Toll-free in USA: 1-877-289-7664 or Outside the USA 661-257-9993).
return to top of policies
Warranty Information
[[[RETURN_POLICY]]]
return to top of policies
Product Summary
Manufacturer:
NVX
Model number:
SDBBP40
UPC
:
818060018701
Weight:
31.00 lbs
Internal SKU:
sdbbp40
Internal Product ID:
133811
FAST SHIPPING
SHIPS THE SAME DAY
When Paid by 1:00 PM EST
*restrictions apply, click for more info
FREE SHIPPING
ON MOST ORDERS
*restrictions apply, click for more info
EXPERIENCED
• American Owned & Operated
• In-House Product Experts
• Selling on Ebay since 2000
• Internet Retailer Top 500
About Us
Contact Us
Payment
Shipping
Order Tracking
Returns
FAQ
© 2000– 2020 Sonic Electronix, Inc. - 15148 Bledsoe St. Unit B, Sylmar, CA 91342 USA
All manufacturer names, model numbers, pictures and product descriptions are for the sole use of describing the product(s) for sale.
All trademarks and trade names are the property of their respective trademark holders.
Prices, specifications, and images are subject to change without notice.
Free Shipping Information
Close [X]
Fast Shipping Information
Close [X]
Same day shipping for orders paid by Tuesday-Friday (Pay by 1:00PM EST)
Orders paid by Saturday and Sunday will ship Monday.
Orders paid on Monday will ship Monday or Tuesday.