Replacement RCA Cable for Dual Turntables / Record Changers / Turntable. #207301

Description

These custom made RCA cables fit Dual turntables that use part number #207-301. They're about 5' [153 cm] in length overall with four 2.8 mm spade connectors on one end and 2 RCA plugs on the other. We make these using Amazon Basics RCA cables which are some of the nicest we've found. They're well shielded, have a capacitance of < 23 pf per foot, and the cable itself is very flexible (unlike many other premium cables). Because these cables are thicker than the originals we include a larger cable clamp and longer screw to replace the original metal clamp. This serves as a strain relief but some plastic bases have a second relief where the cable passes through a metal base plate. That black plastic relief will have to be removed and the cable passed through the existing hole in the base plate. For additional security you can put the supplied zip-tie around the cable just before it passes through the plate. (See the photos for more detail).
Disclaimer: As described above, because these are thicker than the stock cables some changes in the way the cable is clamped will be necessary. The photos show a typical installation but each model & base combination will differ slightly so it's impossible to provide precise instructions for every contingency. It's really a simple procedure and we don't want to make the job sound more complex than it is but it's up to you to make sure these will fit your model and that you're up to the task before ordering. If you have questions please ask us before placing your order.
Note: These are NOT for models that use cables with RCA plugs on both ends. (I.E...1009, 1010, 1015, 1016, 1019, 1209, 1214, 1216, 1218, 1219, 1228, 1229, 721, etc). Those cables are readily available in several lengths from many sources.
Note: We also offer a bundle of this cable and a ground wire. If your ground wire is missing, cut or otherwise damaged please see our other listings. Ordering the bundle saves you the shipping cost of the ground wire.
Thanks for looking!